Wide tuning range up to 184 MHz
True digital diversity reception for each channel, effectively preventing dropouts
Network control via software and applications
Front panel headphone jack allows Dante monitoring
Configurable Ethernet switch for redundant Dante or AES67 digital output
AES3 output
Channel quality meter displays RF signal-to-noise ratio
Locking AC power connector
DC module version available to support redundant power
RF tuning step 25 kHz
Image rejection >70 dB, typical
RF sensitivity -98 dBm (at 10^-5 BER)
Latency Standard mode: 2.0 ms
High-density mode: 2.9 ms
Audio frequency response 20 Hz – 20 kHz (±1 dB)
Audio dynamic range
A-weighted, typical, system gain 10
XLR analog output: 120 dB (A-weighted); 117 (unweighted)
Dante digital output: 130 dB (A-weighted); 126 (unweighted)
Total harmonic distortion: -6 dBFS input, 1 kHz, system gain 10<0.01%
System audio polarity: Positive pressure on the microphone diaphragm produces positive voltage at pin 2 (corresponding to pin 3 of XLR output) and at the tip of the 6.35 mm (1/4 inch) output jack.
Operating temperature range -18 °C (0 °F) to 50 °C (122 °F)
Storage temperature range -29 °C (-20 °F) to 65 °C (149 °F)